How to enable/disable turnpiece functionality?

ALERT: A feature for property managers. If the turnpiece is disabled, the lock will always auto-lock after each entry. The turnpiece will rotate but will not activate passage mode. User code or key will always be required for entry.
1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps.
If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and the keypad will flash green.
3. Press 9. You will hear one long beep and the keypad will flash green.
4. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from Step 1.

Comments

Powered by Zendesk