How to add a user code?

Add user codes
Move swiftly during programming. If no digit is pressed for 10 seconds, the system will time out and you will need to restart the procedure.
1) Make sure the door is open. Press and release the program button using the SmartKey tool or a paper clip. You will hear two beeps.
2) Press 1. You will hear one short beep and the keypad will flash green once.
3) Press the Kwikset button
4) Enter a user code. It must be between 4-8 digits. WARNING: For security reasons, the first 4 digits of each user code must be unique. For example you are unable to program a user code 1-2-3-4-5 as well as a user code 1-2-3-4-6.
5) Press the Kwikset button
6) You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from step 1.

Comments

Powered by Zendesk